Designing and Planning an HVAC System

« Back to Home

How to Plan for the Installation of a Reverse-Cycle System

Posted on

The reverse-cycle heating and cooling system is a favourable appliance choice for your home if you are looking for a versatile climate control unit. This system is beneficial because it is designed to provide internal cooling and heating  year-round. When the weather is hot, the reverse-cycle unit will pull heat from the indoor space, ensuring optimal coolness.

On cold days, the system will absorb heat from outside and release it in the house. This design promotes optimal efficiency in comparison to alternative systems. However, you must keep in mind that the performance will be influenced by the installation of the unit. Here are some crucial tips to remember if you are planning on choosing a reverse-cycle appliance.

Evaluate Your Floor Plan

You should evaluate your home before choosing a reverse-cycle unit for purchase. If you do not take into account the design of your interior space, you might end up with an unsuitable appliance. You should begin by determining the total area of your house. It is important to choose a system which is well-matched with the size of your house for optimal heating and cooling.

You should also consider the dimensions of the different rooms and the general structure of the internal space. These details will be crucial in choosing the number of indoor vents and their positions. If there is an inadequate number of vents in the house, you will not experience optimal comfort. Therefore, plan for vent placement to ensure that each part of the indoor space is covered.

Plan for Power Supply

You should evaluate your needs in relation to power when installing your reverse-cycle system. If you are planning on installing a regular residential unit, you should be able to connect your appliance to your electrical system directly. However, if your chosen air conditioner is powerful and large, it might cause a strain on your electrical system. In this case, it is important to look into upgrading your electrical setup to avoid problems like overheating.

Consider the Thermostat

When installing your reverse-cycle heating and cooling unit, you should plan for the placement of the thermostat or sensors. You can use a single thermostat in enclosed spaces. However, if you have a large house with an open floor, you might need to use multiple sensors for optimal temperature control. It is advisable to consult your HVAC contractor about the possibility of zoning during the planning and installation process. Zoning will allow you to control the temperature in different rooms independently.